| Description |
 PolyBond Plus is a specially formulated latex polymer, fiber-reinforced product designed to mix with Ordinary Portland Cement (OPC) to provide a high-build, easy to trowel adhesive, base, and texture or rectification coat. PolyBond Plus is used to adhere onto polystyrene sheets Expanded Polystyrene Boards (EPS) to approved substrates followed by embedding the Solutions Alkaline Resistant Mesh as part of the base coat that forms the Solutions Insulation Panel System (SIPS) |
| |
| Coverage On Surface |
| Method of application |
Weight Of Material |
Thickness |
Surface Area |
| Conventional trowel
|
20kg tub |
3mm |
9-10m2 |
| Hopper Spray gun |
20kg tub |
3mm |
15m2 |
|
| |
| Performance |
Bond strength - The bond strength of the PolyBond Plus mix exceeds the cohesive strength of insulation board (EPS). Water Vapor Transmission (FSTT P-0035) - No moisture passed wall after 8 hours equivalent to 158kph wind driven rain. |
| Test |
Spec |
Comment |
| Water Permeability |
FSTT P - 0035 |
Excellent - No moisture passed wall after 8 hrs.
Equivalent to 158kph wind driven rain. |
| Freeze Thaw (50 cycles) |
ASTM - C - 67 |
No deterioration |
| Weathering (1000 hrs exposure to weather maker) |
GHD - 71 |
Adhesion - Excellent |
| Combustibility |
ASTM - E - 136 |
Passed 4 hrs |
| Flame/ Fire resistance |
ASTM - E - 119 |
STC 42.3mm thick base coat |
| Sound Transmission |
ASTM - E - 90 |
2.5kg/ liter |
| Specific Gravity |
|
|
| PH |
12 @ 15 hrs |
8 @ 48 hrs |
| Compressive Strength |
7 days |
42MPa |
| Compressive Strength |
28 days |
48MPa |
| Flexural Strength |
Full aged |
12MPa |
| M.O.R. |
B.S. 6432 |
15MPa |
| Initial set @ 200C |
|
25 minutes |
| Initial set @ 300C |
|
15 minutes |
| Alkaline Resistant Mesh |
Per strand |
90N/m |
| Mesh load at break |
Per strand |
535kg/m2 |
| Impact strength |
ACI Committee 544 |
11KJ/m2 |
| Plastic Shrinkage |
|
See ISBN No. 82-595-4060-6 |
| Thermal conductivity |
|
5W/ Moc |
|
| |
| |
QST Polybond Plus
